EFIS

This section contains components required for EFIS ver.1.2 assembly.
Please remember, that the EFIS design is an open platform. You don't have to build it exactly the same way as it is described on the EFIS ver.1.2 page.

HSCDANN015PA2A3 Static pressure sensor (replacement for HSCDANN001BA2A3) and
Adafruit BNO055 boards are available now!
 



Product Image Item Name- Price
PCB for EFIS Sensor Board

PCB for EFIS Sensor Board

PCB only. No components attached. This is a PCB board for the Sensor Board to build EFIS ver.1.2. The Sensor Board connects together all the relevant...
$15.00

Add:

PCB for Display Board

PCB for Display Board

PCB only. No components attached. The Display Board connects Arduino board to LCD display and provide “standards” way to talk to the Sensor...
$15.00

Add:

EFIS Plastic Case 158x90x60mm

EFIS Plastic Case 158x90x60mm

This is the case used for EFIS 19264.
$15.00

Add:

4" LCD Display 192 x 64, KS0107+KS0108 Black on White

4" LCD Display 192 x 64, KS0107+KS0108 Black on White

ERM19264FS-1 is 4"192x64 graphic FSTN LCD display based on ks0107+ks0108 chipset with white LED backlight and parallel interface. The display is used...
$30.00

Add:

Adafruit BNO055 Absolute Orientation Sensor

Adafruit BNO055 Absolute Orientation Sensor

The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per...
$49.00

Add:

Honeywell HSCDANN015PA2A3 Static Pressure Sensor

Honeywell HSCDANN015PA2A3 Static Pressure Sensor

HSCDANN015PA2A3 is high accuracy absolute pressure sensor replacing HSCDANN001BA2A3 Pressure range 0..15PSI Accuracy +/- 0.25% Operating voltage 3.3v...
$49.00

Add:

Arduino Mega 2560

Arduino Mega 2560

Specification: Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins:...
$19.00

Add:

Five (5) 40-pin Male Header terminal strips.

Five (5) 40-pin Male Header terminal strips.

5 strips should be enough for both EFIS Display board and EFIS sensor board
$3.00

Add:

MPXV5010DP Airspeed differential pressure sensor

MPXV5010DP Airspeed differential pressure sensor

$20.00

Add:

20-pin Female Header Strip

20-pin Female Header Strip

This terminal is required to connect Display board to LCD display
$2.00

Add:

20cm Ribbon Cable with 20-pin Female IDC connectors.

20cm Ribbon Cable with 20-pin Female IDC connectors.

This is the cable to connect Display Board to Sensor Board. A cable up to 30cm can be manufactured at request. Please let me know if you need a cable...
$5.00

Add:

5v - 3v Logic Converter I2C. (Level Shifter)

5v - 3v Logic Converter I2C. (Level Shifter)

Two channel (I2C) signal voltage converter to allow 5v devices to communicate with 3.3v devices.
$3.00

Add:

Encoder

Encoder

Encoder for EMS and EFIS control
$4.00

Add:

20-pin PCB-mounted Male IDC connecto

20-pin PCB-mounted Male IDC connecto

This type of connector can be used on Display Board. Possibly on Sensor board too (it has not been tested on Sensor Board).
$2.00

Add:

Two (2) 20-pin Female IDC connectors for Ribbon cable

Two (2) 20-pin Female IDC connectors for Ribbon cable

Use this connectors to make your own ribbon cable to connect Display board to Sensor board
$3.00

Add:



Your IP Address is: 54.196.72.162
wabusiness template